Thermal Control Products

ultraFLOW Couplings & Nipples

Power density is increasing rapidly, requiring an effective cooling solution to avoid overheating. Traditionally air has been the preferred solution, but with the fast-moving development, liquid cooling has been shown to be the most effective. However, many people worry about leaks being just as damaging as overheating in the event of an incident. This is why we have developed ultraFLOW. It is a series of fluid couplings with flat-face design to guarantee no-spill, high flow and low pressure drop for the lowest pump pressure. This will extend hardware life and keep running costs low. The ultraFLOW series is leak tested to ensure reliability for your liquid cooling solutions. It’s available in hard-coated high-strength aluminum to make them lightweight and durable or in stainless steel for corrosive environments or for use with deionized water (DI water). ultraFLOW is available for connecting all types of fluid lines, whether your application involves glycol-water, dielectric fluids, engineered fluids, deionized water or mineral or synthetic heat transfer oils.
Series 287 ultraFLOW, DN5 Aluminium

Series 287 ultraFLOW, DN5 Aluminium

Made of Aluminium with EPDM or Fluorosilicone seals. DN 5 mm (1/4"). Water flow capacity double shut-off Kv 0.93 (Cv 1.08). Max working pressure 10 bar (145 PSI).

Series 288 ultraFLOW, DN5 Stainless steel

Series 288 ultraFLOW, DN5 Stainless steel

Made of Stainless steel (EN 1,4404/ AISI 316L) with EPDM or Fluorosilicone seals. DN 5 mm (1/4"). Water flow capacity double shut-off Kv 1.21 (Cv 1.40). Max working pressure 10 bar (145 PSI).

Series 487 ultraFLOW, DN8 Aluminium

Series 487 ultraFLOW, DN8 Aluminium

Made of Aluminium with EPDM or Fluorosilicone seals. DN 8 mm (5/16"). Water flow capacity double shut-off Kv 2.93 (Cv 3.39). Max working pressure 10 bar (145 PSI).

Series 587 ultraFLOW, DN12 Aluminium

Series 587 ultraFLOW, DN12 Aluminium

Made of Aluminium with EPDM or Flour silicone seals. DN 12 mm (1/2"). Water flow capacity double shut-off Kv 8,08 (Cv 9.30). Max working pressure 10 bar (145 PSI).

Series 588 ultraFLOW, DN12 Stainless steel

Series 588 ultraFLOW, DN12 Stainless steel

Made of Stainless steel (EN 1,4404/ AISI 316L) with EPDM or Flour silicone seals. DN 12 mm (1/2"). Water flow capacity double shut-off Kv 8,08 (Cv 9.30). Max working pressure 10 bar (145 PSI).

Series 687  ultraFLOW, DN15 Aluminium

Series 687 ultraFLOW, DN15 Aluminium

Made of Aluminium with EPDM or Fluorosilicone seals. DN 15 mm (9/16"). Water flow capacity double shut-off Kv 10.3 (Cv 11.9). Max working pressure 10 bar (145 PSI).

Series 787 ultraFLOW, DN20 Aluminium

Series 787 ultraFLOW, DN20 Aluminium

Made of Aluminium with EPDM or Fluorosilicone seals. DN 20 mm (4/5"). Water flow capacity double shut-off Kv 15.7 (Cv 18.2). Max working pressure 10 bar (145 PSI).

Series 788 ultraFLOW, DN20 Stainless steel

Series 788 ultraFLOW, DN20 Stainless steel

Made of Stainless steel (EN 1,4404/ AISI 316L) with EPDM or Fluorosilicone seals. DN 20 mm (4/5"). Water flow capacity double shut-off Kv 15.7 (Cv 18.2). Max working pressure 10 bar (145 PSI).