5G modules with quick couplings reduce stress on power grids and optimize field operations

5G modules with quick couplings reduce stress on power grids and optimize field operations

Technologies within data centers are continuously developing. With the entry of industry 4.0 (digitalization of industry) and 5G, there's a greater demand for machine learning and AI (artificial intelligence). CEJN is part of a research project looking into how 5G modules, designed for sustainable edge computing, reduce stress on power grids and optimize field operations. 


RISE ICE data center, the leading data center research facility in Europe, is running a project focusing on sustainable and effective data centers, cloud, and analytic platforms. Within this project, a 5G module has been constructed to enable innovations and applications for AI and cybersecurity for the public sector. The 5G module is designed for sustainable edge computing. CEJN supplies this project with quick couplings to enable mobility for on-demand applications.

“The goal with the research is the incoming power to a data center, and to stabilize the power grid so that the average load on the grid can be increased, and also work off-line”, said Mattias Vesterlund, Senior Researcher Digital systems & Computer Science at RISE ICE data center, and continues.

“By doing so, the stress in the power grid will be reduced and more evenly loaded.”

 

5G module for the rising needs of AI

Throughout time, energy has developed through different phases and stages. We are now in a phase where machine learning and AI play and will play a bigger role with the entrance of 5G.

The industry has a rising need for AI and machine learning to control production. Using computing power, defective products can be detected, and future ones prevented.
At the ICE demo center, and together with several partners, a 5G edge module with a micro data center demonstrates how this era of technology needs this kind of onsite solution. And this is how it works:

1. The module is connected to a power and cooling microgrid, which enables operational optimization, i.e. for utilization of renewable energy sources such as locally produced photovoltage and free cooling. The primary source of cooling goes into the distribution unit, and then back out to the module.

5G module connected to power and cooling microgrid

 

 

2. The module is then easily brought on a hook lift truck and transported to the industry for installation where there’s a need for machine learning or computing power.

5G modules are transported to the site for on-demand computing requirements

3. For fast and easy connection and disconnection of the module, electricity, data, and liquid cooling is connected through an outlet box on the module. For the liquid cooling connection, quick connect solutions are used to enable easy mobility without draining the system of cooling fluid.

 

 

Quick couplings increase the mobility of the 5G module and the liquid cooling system come prefilled with cooling fluid

(1) Liquid cooling fluid is going in through the first connection, and then (2) out through the connection next to it. On the third connection (3), condensed water is being removed.

 

Quick couplings enable a flexible solution  

Quick couplings may be seen as a small part of the overall project, but yet a very important one. Without quick connectors, the 5G module wouldn’t be able to be as mobile and flexible as it needs to be in order to be effective. 

“Quick couplings enable this module to be a flexible solution as it easily can be connected and disconnected”, says Mattias. 

Using quick couplings also means that customer demands can be met to a greater extent also when the requirements are changing. In times when there is an increased need for computing power, the module can easily be replaced with a more powerful module. 

 

CEJN ultraFLOW meets the requirements 

The module at the demo center is using CEJN ultraFLOW quick couplings, a series of light-weight couplings with no-spill – which is essential when working with electronics. The no-spill feature will also allow working with pre-filled cooling modules, and thereby there’s no need for draining and re-filling the system with cooling fluid upon disconnection and connection. 

“CEJN ultraFLOW meets all the requirements for this project in terms of quality and reliability”, Mattias concludes.  

*Once the project is complete, RISE ICE hopes to inspire companies in selling this module to manufacturing industries. As RISE works for the public sector, they don’t pursue any own profitability, but support companies with knowledge and technologies. 

 

Mattias Vesterlund

Mattias Vesterlund works as a senior researcher within digital systems and computer science at RISE ICE data center in Luleå, Sweden. He has a civil engineer degree and a Ph.D. in energy technology and is now also an adjunct lecturer in sustainable energy technology at Luleå University of Technology. 

Related Stories

How quick connect couplings reduce wind turbine maintenance costs and help to prevent IGBT failures

How quick connect couplings reduce wind turbine maintenance costs and help to prevent IGBT failures

Power-electronic converters in wind power turbines are critical components. They are shown to be one of the most frequently failing parts, according to an article from MDPI (source: MDPI). The most...

Thermal management for safe and efficient fast-charging of battery electric vehicles on the road

Thermal management for safe and efficient fast-charging of battery electric vehicles on the road

The interest in battery electric vehicles (BEV) is increasing. Yet, a continuous challenge is the availability of fast-charging stations while being on the road. In order to reduce charging time, the...

ultraFLOW now available in Stainless Steel

ultraFLOW now available in Stainless Steel

ultraFLOW quick couplings are the ideal choice for liquid cooling of electronics. It has an extremely low pressure drop that will help to increase the overall energy efficiency. ultraFLOW offers all...