Step-by-step guide: How to install CEJN TLX on hydraulic attachments
In heavy-duty applications, the failure of quick-connect couplings often comes from high surge flows. These surges can lead to seal failures and machine damage, resulting in costly leakages and machine downtime. CEJN TLX is a super-duty coupling solution specifically designed to withstand the highest surge flows and toughest pressure impulses. In this guide, you can follow the steps of how to install CEJN TLX on hydraulic attachments.
Installing CEJN TLX is an easy job. Watch the instruction video or follow the step-by-step guide underneath on how to safely install the TLX. These tools are required: Wrench according to TLX connection size and a pair of pliers.
- Check the required oil flow on the hydraulic attachment you are about to install CEJN TLX on.
3. Collect your chosen size as well as matching dust caps to avoid contamination.
4. Assemble the correct adapter on the TLX.
5. Connect the TLX and tighten according to thread standards.
6. Fit the locking pin wire in the desired position.
7. Make sure that the arrows are in line with each other.
8. Insert the locking pin.
9. Repeat the same procedure with the dust caps.
10. Repeat on the second hose line.
11. Repeat the same steps on the machine.
12. Remove the dust cap and connect the attachment to the machine.
13. Important to connect dust caps when the couplings are connected to avoid contamination.
14. Repeat on the other side.
This is CEJN TLX
CEJN TLX is a hydraulic flat-face twist lock coupling made for the toughest construction and demolition applications. This super-duty quick connect coupling is designed to work with the highest surge flows and the toughest pressure impulses.
Read more here
Related Stories
Step-by-step guide: How to change the seal on CEJN TLX coupling
Using products that last is a sustainable choice for both the wallet and the planet. Rather than disposing of a product once it reaches the end of its service life, we offer a wide range of spare...
WEO hydraulic plug-in fittings now available in 5/8”
WEO hydraulic plug-in fittings are known for the versatility and space and time-saving features that also help prevent leakages and premature hose failures. To make WEO available for even more...
Increased performance and no more oil leaks for Reinhard Recycling after installing CEJN TLX
Reinhard Recycling had a problem with oil leaks when disconnecting their couplings from the hydraulic attachments. They were recommended CEJN TLX, a super-duty coupling solution designed to work with...