Серия X согласно ISO 16028
Защитный замок Плоское лицо ISO 16028 Нержавеющая сталь Соединение под давлением
Муфты с плоским торцом для гидравлики (ISO 16028) с компенсатором давления или без него
|Диаметр условного прохода||3.2, 6.3, 10, 12.5, 16, 19, 25|
|Max working pressure connected (MPa)||250 - 720 бар (3625 - 10442 PSI)|
|Max working pressure disconnected (MPa)||250 - 720 бар (3625 - 10442 PSI)|
|Min. burst pressure connected||1000 - 1500 бар (14503 - 21755 PSI)|
|Min. burst pressure disconnected||1000 - 1500 бар (14503 - 21755 PSI)|
|Материал муфты||Нержавеющая сталь, AISI 316, Сталь (пассивация цинком)|
Flat-face couplings for clean and spill-free hydraulic systems
Advanced hydraulic systems set high demands on cleanliness. Outdated ISO-A poppet valve-type couplings are still being used in many modern machines. Consequently, a high volume of hydraulic oil is spilled worldwide every day due to disconnections that result in hefty clean-up and replacement oil costs. Subsequently, contaminants can enter the hydraulic system during connection, reducing the service life of the components as well as the overall system.
X-series are clean and spill-free flat-face couplings that conform to the ISO 16028 standard.
A modern quick coupling for modern equipment
- Flat-face design (ISO 16028)
- Safety lock
- One-hand operation
- Less contamination
- Less pollution
- Minimizes spillage
Long service life also in heavy-duty applications
One of the biggest benefits you get by choosing the CEJN X-series is a longer service life, longer endurance in heavy-duty applications and high working pressure. When producing the CEJN nipples we use case hardening of the nipple bodies which gives the highest surface hardness possible. The most common hardening method is local hardening (induction), on specific areas on the nipple, which typically has a surface hardness that is 30% lower than the method CEJN use.
This is of course a big advantage in the toughest applications but also in more ordinary applications where you will get a longer service life on your quick connect couplings.
Easier connection under pressure with superior pressure relief
The unique design of CEJN’s couplings and nipples makes it possible to connect with residual pressure without damaging anything in the couplings, also with standard products. This is possible on both couplings and nipples as long as you only have residual pressure on one side. Residual pressure is mostly caused by expanding oil due to elevated temperatures and results in substantially increased connection force. The only limitation to connect is your physical strength.
The X65 pressure eliminators are compactly designed to puncture and equalize the residual pressure. They make it possible to connect the hydraulic system without the need for extensive force, which ensures a fast and easy connection process.
Руководства и брошюры
Clean and Leak-Free Hydraulic Systems
X64 Pressure Eliminator