Системы сцепления для гидравлики высокого давления

Защитный замок Нержавеющая сталь Продукт безопасности Натяжение болтов

Системы быстроразъемных соединений для гидравлики сверхвысокого давления

Технические данные

Диаметр условного прохода 2.5, 4.5
Макс. рабочее давление 100 - 400
Материал муфты AISI 316, закаленная нержавеющая сталь, Закалённая оцинкованная сталь, Закаленная сталь с покрытием из хромата цинка, Закаленная сталь с черненой поверхностью, Закаленная сталь, цинк-никелевое покрытие, цинк-железное покрытие

The global standard for ultra high-pressure couplings

CEJN High-Pressure Hydraulic couplings and nipples are depended upon throughout the world to help keep ships sailing, wind turbines turning, subsea exploration equipment drilling and a whole lot more ultra high-pressure hydraulic applications. It is a CEJN original design that has grown into a global standard.

All CEJN High-Pressure Hydraulic couplings and nipples are designed with a non-drip interface to minimize fluid spillage and air inclusion during connection and disconnection. Dust caps are a standard feature to protect hydraulic systems from contaminants.

The Next Generation - Key Features load movie 
The Next Generation - Key Features
 
 
Hose configurator for ultra high-pressure hose kits with end connections, quick couplings and nipples

Configure a high-pressure hydraulic hose kit

Configure and order hydraulic hose assemblies with the easy-to-use hose configurator for ultra high-pressure hydraulic hose kits. With the configurator you can easily specify hose fittings, hydraulic quick couplings, nipples and accessories according to your specifications.

Start a configuration

 
 

Safety lock secures the connection

A quick and smooth locking ring gives extended security to your connection. Screw locks are sometimes considered by users to be time-consuming and left unscrewed. With the safety lock on the ultra high-pressure quick couplings, unintentional disconnection is practically eliminated, just a quick twist of the bayonet lock and your hydraulic coupling is secured.

 
 

Alert Ring for Safe Connection

The CEJN ultra high-pressure quick connect couplings have an “Alert ring” installed on the front part that clearly indicates if the connection is safe. If the red ring is still visible, the connection is not complete and when pressurizing the system, the nipple may suddenly shoot out of the coupling under pressure.

 
 

CEJN Metal Seal (CMS)

CEJN Metal Seal is the optimum and recommended sealing method developed to be a safe and reliable seal even at extremely high pressures. Due to the smaller diameter and position of CMS, stress is kept to a minimum. In the unlikely event of leakage, the oil pressure will be dispersed within the coupling without any danger to the operator.

 
 

Safety and Knowledge Since 1955

CEJN has been focused on designing safe and reliable products since day one. Today we have quick-connect hydraulic couplings up to 4000 bar/400 MPa. This makes us world leaders and entails a responsible commitment to development to which CEJN is deeply dedicated.

 
 

CEJN High-Pressure Centre

The CEJN High-Pressure Centres are located around the world for closer proximity to our markets and are all staffed by certified application experts. Each centre features a hose-crimping facility that assembles high-pressure hose kits to customer specifications. Every set is checked and measured before delivery for safety and performance to eliminate any risk of failure.

 
 

Never underestimate the dangers of working with ultra high-pressure hydraulics

 
Potential Dangers with Ultra High-Pressure Hydraulic Applications load movie 
Potential Dangers with Ultra High-Pressure Hydraulic Applications

Руководства и брошюры

Информацию о доступности и цене узнавайте у официального дилера.

Найти дилера

 

Соблюдая следующие правила, Вы обеспечите безопасную работу при сверхвысоком давлении.

 

Загрузить правила безопасности