Thermal Control Products, ultraFLOW Couplings & Nipples

Series 288 ultraFLOW, DN5 Stainless steel

  • Spill-free design (flat-face)
  • Unequalled low pressure drop
  • Can be used with deionized water (DI water)
  • Colour coding option to eliminate cross connection


ultraFLOW is available for any type of fluid. The stainless steel versions of the ultraFLOW are especially suited for applications in corrosive environments or when deionized water or other aggressive fluids are used. The couplings are primarily used for liquid cooling solutions in data center applications, power electronics and equipment within the semiconductor manufacturing industry. It’s also used for liquid cooling within transportation, industry, renewable energy and broadcasting. ultraFLOW has extremely good pressure drop performance. The lower pressure drop will benefit the overall system performance. The total pressure drop of each coupling, hose, pipe and component adds up and is highly affecting the total energy efficiency of the cooling system. ultraFLOW will help reduce the overall pressure drop and increase energy efficiency. The flat-face design will guarantee no spill on connection or disconnection also in a system under pressure. This allows for hot swaps to avoid critical system downtime. The stainless steel version is suitable for any type of fluid, even deionized water, glycol mixtures, mineral or synthetic oils or dielectric fluids.The couplings are also suitable for two-phase liquid cooling solutions as they have shown equally good performance for both liquids and gas.


Applications: High-performance computing racks/switch blades, chassis manifolds, cold plate, rack CDU manifolds, GPU manifolds, LED equipment, fuel cells, graphic cards, theatre projectors, medical imaging equipment, IGBT’s, power converters, power inverters, rectifiers, industrial drives, semiconductor manufacturing equipment (chillers, scrubbers, lithography systems, wafer processing, metrology equipment) Are you looking for a different size or sealing? Don’t hesitate to contact us and we’ll put our R&D department at your disposal.


http://www.cejn.com/upload/download/Brochures/SERIES-288-DN5-WATER-FLOW-CEJN.pdf (Water Flow Series 288 DN5 PDF)

Series 288 ultraFLOW, DN5 Stainless steel
Couplings (Sockets) Part No. Connection Seal A B C D
Female thread 10 288 1222 102881222G 1/4" (BSP)EPDM57.524.7-18
 10 288 1224 102881224G 3/8" (BSP)EPDM62.524.7-22
Male thread 10 288 1272 102881272G 1/4" (BSP)EPDM59.524.71119
 10 288 1274 102881274G 3/8" (BSP)EPDM589.524.71219


Nipples (Plugs) Part No. Connection Seal A B C D
Female thread 10 288 6222 102886222G 1/4" (BSP)EPDM51.520.8-19
 10 288 6224 102886224G 3/8" (BSP)EPDM62.023.8-22
Male thread 10 288 6272 102886272G 1/4" (BSP)EPDM50.520.81119
 10 288 6274 102886274G 3/8" (BSP)EPDM50.520.81219


Accessories Part No. Connection Seal A B C D
Washer/ O-ring 10 287 4272 102874272G 1/4" (BSP)EPDM----


Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.
Technical data
Nominal flow diameter: 5.0 mm (3/16")
Max. working pressure: 10 bar (145 PSI)
Min. burst pressure: 40 bar (580 PSI)
Temperature range: -40°C — +150°C (-40°F — +302°F)
Material coupling: Stainless steel (EN 1,4404/ AISI 316L)
Material nipple: Stainless steel (EN 1,4404/ AISI 316L)
Kv (double shut-off): 1.21
Cv (double shut-off): 1.40
Comment: Flow coefficient Kv/ Cv are specified for flow direction with lowest value. Color coding possible as an option.
Material seal: EPDM- 30°C - +150°C, Other seal materials upon request.

Flow coefficient Kv/ Cv are specified for flow direction with lowest value. Color coding possible as an option.

Flow
Pressure drop, bar (PSI) Series 288 ultraFLOW, DN5 Stainless steel Flow, l/min. (GPM)

Available files for download

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN. By submitting this form you may recieve e-mail send-outs. You can unsubscribe from them at any time.