Pneumatic Products, Air Treatment (FRL)
Regulators Model 653
- Rolling diaphragm to maximise service life
- Constant output pressure
- Accurate pressure regulation
The job of a regulator is to regulate air pressure and keep it constant. This is especially important for certain pneumatic equipment. CEJN’s Model 653 ensures minimal pressure differences between the set point and the operating pressure. It has an adjustment range of 0.5 to 12 bar, to maintain the required pressure level. It has been designed with a rolling diaphragm to maximise service life, a gauge for visual pressure control and a locking device to prevent accidental adjustment. Its high flow capacity of up to 11500 l/min and its low pressure drop help save energy and cut costs. CEJN’s Model 653 is available with G 3/4" and G 1" threads. Application: Virtually every industry, e.g. manufacturing, food, processing, carpentry, paper mills, etc., relies on compressed air as an energy source. In a shared compressed air network, with numerous outlets and an extensive pipework system, air preparation units are especially important.
For smaller sizes please see Model Mini, Model 651 and Model 652. Additional air preparation products, including preassembled units, are available in our air-treatment range.
|REGULATOR,||Part No.||Connection||Max inlet pressure||Controlled pressure||Max flow|
|19 503 2207 195032207|
|REGULATOR||Part No.||Connection||Max inlet pressure||Controlled pressure||Max flow|
|19 503 2209 195032209|
|Compressed air, neutral gas|
|12 bar (174 PSI)|
|5°C — + 50°C (41°F — + 122°F)|
|0.5-12 bar (7-174 PSI)|
|0.4 bar (5 PSI)|