Hydraulic Products, X64 Range - ISO 16028 Flat-Face Pressure Eliminator Nipples

Series 264, DN6.3 Pressure Eliminator

  • Flat-Face design
  • Connection under pressure
  • One-hand operated

CEJN Series 264 is a Flat-Face quick-connect nipple with a built-in pressure eliminator. The nipple is according to and exceeds the demands in the ISO 16028 Standard for low- and medium-pressure hydraulic applications. The Flat-Face design minimizes spillage during connection and disconnection. The pressure eliminator allows for connection with residual/trapped pressure on the nipple side. The nipple Series 264 connects with couplings in Series 265, Series 266 and Series 262.

The pressure eliminator nipples are also available in four other sizes; DN 10 (Series 364), DN 12.5 (Series 564), DN 16 (Series 664), DN 19 (Series 764). For steel couplings in accordance with ISO 16028 see Series 265. Stainless steel versions of the standard are available in Series 266. Series 262 feature an interchangeable steel coupling designed for lower pressures.

Nipples with pressure eliminator Part No. Connection Length Diameter Hexagon Seal
Female thread 10 264 6102 102646102Rc 1/4" (BSPT)74.425.221NBR
 10 264 6202 102646202G 1/4" (BSP)74.425.221NBR
 10 264 6402 1026464021/4" NPT74.425.221NBR
 10 264 6602 1026466027/16"-20 UNF (1/4" SAE)74.425.221NBR
Male thread 10 264 6554 102646554M14x1.5 08L74.925.221NBR
 10 264 6555 102646555M16x1.5 10L75.925.221NBR

Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.
Technical data
Temperature range: -30°C — +100°C (-22°F — +212°F)
Material nipple: Hardened steel (zinc passivation)
Material seal: Nitrile (NBR/PUR)
Connectability: With static pressure up to 400 bar on the nipple side
Max. working pressure connected: 500 bar (7251 PSI)
Max. working pressure disconnected: 500 bar (7251 PSI)
Min. burst pressure connected: 1500 bar (21755 PSI)
Min. burst pressure disconnected: 1500 bar (21755 PSI)
Disconnection under pressure: Not allowed
Comment: Connects with couplings from Series 265, Series 266 and Series 262
Interchangeable with: All brands dimensionally interchanging with ISO16028

Rated flow is measured at 0.1 MPa pressure drop.
Approved to max working pressure
Max working pressure 31.5 MPa according to ISO 16028

Pressure drop chart
Series 264, DN6.3 Pressure Eliminator Flow measured with coupling Series 265

Available files for download

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN. By submitting this form you may recieve e-mail send-outs. You can unsubscribe from them at any time.