Ultra High-Pressure Hydraulic Products, Hose Assemblies

Hose 70 MPa, DN 6

The CEJN 070 High-Pressure hose has a spiral steel reinforced, polymer construction, that picks up where conventional product capabilities stop. It gives you ultra-high working pressure with maintained flexibility through entire life. Its low volumetric expansion gives fast response time in hydraulic systems while the smooth inner bores provide a minimized pressure drop. A long-lasting service time and extended hose life in even the toughest applications is a result of the kink-resistant steel-reinforced construction, abrasion-resistant covers and a superior chemical resistance. The compact outside diameter and tight bending radius makes the hose ideal for tight routing.

Hose 70 MPa, DN 6
Hose Part No. Description
  19 951 0701 199510701Red
 19 951 0702 199510702Yellow
 19 951 0703 199510703Black
 19 951 0704 199510704Blue


Twin Hose Part No. Description
  19 951 0710 199510710Red/Yellow
 19 951 0711 199510711Black/Yellow


End Connections Part No. Description
  19 951 0730 199510730G 1/4" male + 60° int. sealing cone + recess for Tredo sealing ring (19 950 0062)
 19 951 0731 199510731G 1/4" male + recess for USIT sealing ring (19 950 0084)
 19 951 0732 199510732G 1/4" male + 100° ext. sealing cone (for CMS* 120°).
 19 951 0733 199510733G 1/4" male + flat end for copper washer (09 950 4600)
 19 951 0734 1995107341/4" NPT male
 19 951 0735 1995107353/8" NPT male
 19 951 0736 199510736R 3/8" male
 19 951 0737 199510737Sealing cone universal (24/60°) ext. + G1/4" female swivel nut.
 19 951 0738 199510738Sealing cone universal (24/60°) ext. + M14 x 1.5 female swivel nut
 19 951 0739 199510739Sealing cone 24° ext. with O-ring + M18 x 1.5 female swivel nut
 19 951 0740 1995107403/8" NPT female
 19 951 0741 199510741R 1/4" male
 19 951 0742 199510742G 3/8" male + 60° int. sealing cone + recess for Tredo ring (19 950 0064)
 19 951 0743 1995107431/4" NPT female
 19 951 0744 199510744Sealing cone 24° ext. with O-ring + M16 x 1.5 female swivel nut
 19 951 0746 1995107461/4" NPT male. Stainless steel
 19 951 0748 199510748Sealing cone type M + 9/16"-18 UNF female swivel nut.
 19 951 0749 199510749M12 x 1.5 male + 24° int. flared cone
 19 951 0751 1995107511/8" NPT male
 19 951 0752 199510752Sealing cone JIC 37° int. + 7/16"-20 UNF swivel nut
 19 951 0754 199510754Sealing cone universal (24/60°) ext. + G1/4" female swivel nut. Stainless steel.
 19 951 0755 199510755Sealing cone JIC 37° int. + 9/16"-18 UNF swivel nut


Accessories Part No. Description
  19 951 0008 199510008CIS programable NFC tag
 19 951 0780 199510780Kink-protection spring
 19 951 1081 199511081Clamb for twin-hose
 19 951 1880 199511880Protection hose PVC DN18
 19 951 1882 199511882Firesleeve Protection hose


Seals Part No. Description
  09 950 4600 099504600Copper washer
 19 950 0062 199500062Bonded seal 1/4" parallel male thread (tredo/dowty) suitable for 199510730 and other connections
 19 950 0064 199500064Bonded seal 3/8" parallel male thread (tredo/dowty) suitable for 199510742 and other connections
 19 950 0084 199500084Bonded seal 1/4" parallel male thread (USIT ring) suitable for 199510731, 199511831 and other connections


Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.
Technical data
Design: Inner tube of polyamide (PA), 2 spiral layers of high tensile steel wire, 2 open spiral synthetic fibre, outer sheath of polyurethane (PUR)
ID x OD: 6.4 x 12.5 mm
Max. working pressure: 70.0 MPa
Min. burst pressure: 186.0 MPa
Min. bend radius: 70 mm (2.8")
Weight: 190 g/m (6.7 oz)
Temperature range: -40°C — +100°C (-40°F — +212°F)

Available files for download

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN.