Ultra High-Pressure Hydraulic Products, Hose Assemblies

Hose 250 MPa, DN 5

The CEJN High-Pressure hose is a spiralized steel reinforced polymer hose that picks up where conventional product capabilities stop. It gives you ultra-high working pressure with maintained flexibility through entire life. Its low volumetric expansion gives fast response time in hydraulic systems while the smooth inner bores provide a minimized pressure drop. A long-lasting service time and extended hose life in even the toughest applications is a result of the kink-resistant steel-reinforced construction, abrasion-resistant covers and a superior chemical resistance. The small outside diameter makes the hose ideal for tight routing.

Hose 250 MPa, DN 5
Hose Part No. Description
  19 951 2501 199512501Red
 19 951 2502 199512502Blue


End Connections Part No. Description
  19 951 2530 199512530G 1/4" male + 100° ext. sealing cone (for CMS* 120°).
 19 951 2531 199512531Sealing cone universal (24/60°) ext. + G1/4" female swivel nut
 19 951 2532 199512532Sealing cone (58°) ext. + 9/16" - 18 UNF female swivel nut.
 19 951 2533 199512533M16 x 1,5 male + sealing cone (58°) ext.
 19 951 2534 199512534G 1/4" male + flat end for copper washer seal (09 950 4600)
 19 951 2535 1995125351/4" - 28 UNF left hand + sealing cone (58°) ext.
 19 951 2538 199512538Sealing cone universal (24/60°) ext. + M14x1,5 female swivel nut.
 19 951 2571 199512571G 1/4" male + 100° ext. sealing cone (for CMS* 120°). Stainless steel.
 19 951 2572 199512572Sealing cone (58°) ext. + 9/16"-18 UNF female swivel nut. Stainless steel
 19 951 2573 1995125733/8”-24 UNF left hand + sealing cone (58°) ext.


Accessories Part No. Description
  19 951 0008 199510008CIS programable NFC tag
 19 951 1082 199511082Kink-protection plastic moulded soft
 19 951 1882 199511882Firesleeve Protection hose
 19 951 1883 199511883Protection hose PVC DN20


Seals Part No. Description
  09 950 4600 099504600Copper washer


*Sealing with copper washer is not recomended above 200MPa. Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.
Technical data
Design: Inner tube of polyoxymethylene (POM), 6 spiral layers of high tensile steel wire, outer sheath of polymide (PA)
ID x OD: 4.7 x 13.0 mm
Max. working pressure: 250.0 MPa
Min. burst pressure: 625.0 MPa
Min. bend radius: 175 mm (6.9")
Weight: 410 g/m (14.4 oz)
Temperature range: -40°C — +100°C (-40°F — +212°F)

Available files for download

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN.