Ultra High-Pressure Hydraulic Products, Couplings & Nipples

Series 116 T-Connection, 150 MPa

  • One-piece design
  • Lightweight, compact
  • Cost-effective


CEJN’s Series 116 T-Connection is a lightweight, one-piece coupling and nipple combination for making serial connections on high-pressure hydraulic tools, such as bolt tensioners and cylinders. Replacing traditional porting blocks that can require up to 13 components with at least five different part numbers, the compact T-connection minimizes risk for leakage by reducing potential leak points. A modified seal enables the nipple valve to handle dynamic load while disconnected, without the risk of seal damage. The tested, pre-assembled connection comes ready for installation, thereby saving assembly time and costs.


Series 116 T-Connection, 150 MPa
A Part No. Length Height Depth
With 1 coupling and 2 nipples 10 116 3166 101163166103 mm62 mm28 mm


B Part No. Length Height Depth
With 2 couplings and 1 nipple 10 116 3116 101163116121 mm89 mm28 mm


C Part No. Length Height Depth
With 2 couplings and 1 nipple 10 116 3161 101163161- mm62 mm28 mm


D Part No. Length Height Depth
With 3 couplings 10 116 3111 101163111- mm89 mm28 mm


E Part No. Length Height Depth
With 1 coupling and 2 nipples 10 116 3616 101163616- mm89 mm28 mm


F Part No. Length Height Depth
With 3 nipples 10 116 3666 101163666- mm62 mm24 mm


Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.
Technical data
Nominal flow diameter: 2.5 mm (3/32")
Flow capacity: 6.0 l/min ( GPM UK)
Max. working pressure: 150.0 MPa
Min. burst pressure: 300.0 MPa
Temperature range: -30°C — +100°C (-22°F — +212°F)
Material coupling: Hardened, zinc chromate plated steel
Material nipple: Hardened, zinc chromate plated steel
Material seal: Nitrile (NBR) other sealing materials on request

Flow capacity is measured at 0.4 MPa pressure drop

Oil Flow
Pressure drop, MPa Series 116 T-Connection, 150 MPa Flow, l/min. (GPM UK)

Available files for download

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN. By submitting this form you may recieve e-mail send-outs. You can unsubscribe from them at any time.