Thermal Control Products, ultraFLOW Couplings & Nipples

Series 287 ultraFLOW, DN5 Aluminium

  • Unequalled low pressure drop
  • Lightweight and compact design
  • Colour coding option to eliminate cross connection
  • Universal connections for total flexibility


The CEJN Series 287 ultraFLOW is especially suitable for direct liquid cooled (DLC) server blades in data center applications, power electronics, transportation, industry, renewable energy but also in broadcasting. This two-hand operated, lightweight, hard-coated, high strength aluminium connector has been provided with the best possible characteristics for applications where leaks are not an option! Allowing for hot swaps to avoid critical system downtime when upgrading equipment, the ultraFLOW’s smart design minimizes flow restrictions and provides a long-lasting connection, with non-leak performance during connection / disconnection. It is resistant to vibrations and mechanical stresses, which is required in the railway traction sector. To give you maximum hardware output and low running costs, the ultraFLOW has an extreme high flow capacity meaning an unequalled low pressure drop to minimize system pressure required and, thus, reducing your Total Cost of Ownership.


Applications: High-performance computing racks/switch blades, chassis manifolds, cold plate, rack CDU manifolds, GPU manifolds, LED equipment, fuel cells, graphic cards, theatre projectors, medical imaging equipment, IGBT’s, power converters, power inverters, rectifiers, industrial drives. Are you looking for a different size or sealing? Don’t hesitate to contact us and we’ll put our R&D department at your disposal, other sizes are available and under development.


http://www.cejn.com/upload/download/Brochures/SERIES-287-DN5-WATER-FLOW-CEJN.pdf (Water Flow Series 287 DN5 PDF)

Series 287 ultraFLOW, DN5 Aluminium
Couplings (Sockets) Part No. Connection Seal A B C D
Hose connection 10 287 1022 1028710226.4 mm (1/4")EPDM71.0251819
 10 287 1032 1028710326.4 mm (1/4")FVMQ71.0251819
Female thread 10 287 1222 102871222G 1/4" (BSP)EPDM57.525-19
 10 287 1232 102871232G 1/4" (BSP)FVMQ57.525-19
Male thread 10 287 1272 102871272G 1/4" (BSP)EPDM59.5251119
 10 287 1282 102871282G 1/4" (BSP)FVMQ59.5251119


Nipples (Plugs) Part No. Connection Seal A B C D
Hose connection 10 287 6022 1028760226.4 mm (1/4")EPDM57.5211819
 10 287 6032 1028760326.4 mm (1/4")FVMQ57.5211819
Female thread 10 287 6222 102876222G 1/4" (BSP)EPDM51.521-19
 10 287 6232 102876232G 1/4" (BSP)FVMQ51.521-19
Male thread 10 287 6272 102876272G 1/4" (BSP)EPDM50.5211119
 10 287 6282 102876282G 1/4" (BSP)FVMQ50.5211119


Accessories Part No. Connection Seal A B C D
Washer/ O-ring 10 287 4272 102874272G 1/4" (BSP)EPDM----
 10 287 4282 102874282G 1/4" (BSP)FVMQ----


Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.
Technical data
Nominal flow diameter: 5 mm (1/4")
Max. working pressure: 10 bar (145 PSI)
Min. burst pressure: 40 bar (580 PSI)
Temperature range: -40°C — +150°C (-40°F — +302°F)
Material coupling: Hard anodized aluminium
Material nipple: Hard anodized aluminium
Kv (double shut-off): 0.93
Cv (double shut-off): 1.08
Comment: Flow coefficient Kv/ Cv are specified for flow direction with lowest value. Color coding possible as an option.
Material seal: EPDM -30°C - +150°C; FVMQ -40°C - +150°C

-

Flow
Pressure drop, bar (PSI) Series 287 ultraFLOW, DN5 Aluminium Flow, l/min. (GPM)

Available files for download

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN.