Ultra High-Pressure Hydraulic Products, Hose Assemblies

Hose 72 MPa, DN 6

The CEJN High-Pressure hose is a spiralized steel reinforced polymer hose that picks up where conventional product capabilities stop. It gives you ultra-high working pressure with maintained flexibility through entire life. Its low volumetric expansion gives fast response time in hydraulic systems while the smooth inner bores provide a minimized pressure drop. A long-lasting service time and extended hose life in even the toughest applications is a result of the kink-resistant steel-reinforced construction, abrasion-resistant covers and a superior chemical resistance. The small outside diameter makes the hose ideal for tight routing.

Hose Part No. Description
  19 951 0721 199510721Red
 19 951 0722 199510722Yellow
 19 951 0723 199510723Black
 19 951 0724 199510724Blue


Twin Hose Part No. Description
  19 951 0791 199510791Black/Red
 19 951 0792 199510792Red/Blue
 19 951 0793 199510793Yellow/Black
 19 951 0794 199510794Red/Yellow


End Connections Part No. Description
  19 951 0730 199510730G 1/4" male with 60° int. sealing cone + recess for Tredo ring (19 950 0062)
 19 951 0731 199510731G 1/4" male with recess for USIT ring (19 950 0084)
 19 951 0732 199510732G 1/4" male with 120° ext. sealing cone (CMS)
 19 951 0733 199510733G 1/4" male flat end for copper washer (09 950 4600)
 19 951 0734 1995107341/4" NPT male
 19 951 0735 1995107353/8" NPT male
 19 951 0736 199510736R 3/8" male
 19 951 0737 199510737Sealing head (60°) + G 1/4” female swivel nut
 19 951 0738 199510738Sealing head (60°) + M14 x 1.5 female swivel nut
 19 951 0739 19951073924° ext. sealing cone with O-ring + M18 x 1.5 female swivel nut
 19 951 0740 1995107403/8" NPT fixed female
 19 951 0741 199510741R 1/4" male
 19 951 0742 199510742G 3/8" male with 60° int. sealing cone + recess for Tredo ring (19 950 0064)
 19 951 0743 1995107431/4" NPT fixed female
 19 951 0744 19951074424° ext. sealing cone with O-ring + M16 x 1.5 female swivel nut
 19 951 0746 1995107461/4" NPT male stainless steel
 19 951 0749 199510749M12 x 1.5 male with 24° int. flared cone
 19 951 0751 1995107511/8" NPT fixed male
 19 951 0752 199510752JIC 37° cone + 7/16"-20 UNF swivel nut
 19 951 0754 199510754Sealing head (60°) + G 1/4” female swivel nut, stainless steel


Accessories Part No. Description
  19 951 0008 199510008CIS programable NFC tag
 19 951 1081 199511081Clamb for twin-hose
 19 951 1080 199511080Kink-protection spring
 19 951 1082 199511082Kink-protection plastic moulded soft
 19 951 1085 199511085Kink-protection, plastic black
 19 951 1086 199511086Kink-protection, plastic blue
 19 951 1087 199511087Kink-protection, plastic red
 19 951 1088 199511088Kink-protection, plastic yellow
 19 951 1880 199511880Protection hose PVC DN18
 19 951 1882 199511882Firesleeve Protection hose
 19 951 1883 199511883Protection hose PVC DN20


Seals Part No. Description
  09 950 4600 099504600Copper washer
 19 950 0062 199500062Bonded seal 1/4" parallel male thread (tredo/dowty) for 199510730
 19 950 0064 199500064Bonded seal 3/8" parallel male thread (tredo/dowty) for 199510742
 19 950 0084 199500084Bonded seal 1/4" parallel male thread (USIT ring) for 199510731 and 199511831


Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.
Technical data
Design: Inner tube of Polyamide (PA12) Two spiral layers and two open spiral layers of high tensile steel wire. Outer sheath of polyurethane (PUR)
ID x OD: 6.4 x 12.5 mm
Max. working pressure: 72.0 MPa
Min. burst pressure: 288.0 MPa
Min. bend radius: 70 mm (2.8")
Weight: 250 g/m (8.8 oz)
Temperature range: -40°C — +100°C (-40°F — +212°F)

Available files for download

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN.