Ultra High-Pressure Hydraulic Products, Hose Assemblies

Hose - 70 MPa, DN 6 CEJN 060

The CEJN 060 High Pressure polymer hose is reinforced with two layers of spiralled steel which are bonded together. This entry level hose gives superior performance against conventional hoses. It delivers top level performance with regards to both pressure drop due to its smooth bore and low volumetric expansion providing suitably accurate response times in hydraulic systems. This is a more portable hose due to the lower weight and the kink-resistant steel construction. It has a tight bend radius of 70mm and an outside diameter of just 11.6mm making it ideal for routing into tight gaps.

Hose - 70 MPa, DN 6 CEJN 060
Hose Part No. Description
  19 951 0601 199510601Red
 19 951 0602 199510602Yellow
 19 951 0603 199510603Black
 19 951 0604 199510604Blue


Twin hose Part No. Description
  19 951 0610 199510610Red/Yellow
 19 951 0611 199510611Black/Yellow


End Connections Part No. Description
  19 951 0730 199510730G 1/4" male with 60° int. sealing cone + recess for Tredo ring (19 950 0062)
 19 951 0731 199510731G 1/4" male with recess for USIT ring (19 950 0084)
 19 951 0732 199510732G 1/4" male with 120° ext. sealing cone (CMS)
 19 951 0733 199510733G 1/4" male flat end for copper washer (09 950 4600)
 19 951 0734 1995107341/4" NPT male
 19 951 0735 1995107353/8" NPT male
 19 951 0736 199510736R 3/8" male
 19 951 0737 199510737Sealing head (60°) + G 1/4” female swivel nut
 19 951 0738 199510738Sealing head (60°) + M14 x 1.5 female swivel nut
 19 951 0739 19951073924° ext. sealing cone with O-ring + M18 x 1.5 female swivel nut
 19 951 0740 1995107403/8" NPT fixed female
 19 951 0741 199510741R 1/4" male
 19 951 0742 199510742G 3/8" male with 60° int. sealing cone + recess for Tredo ring (19 950 0064)
 19 951 0743 1995107431/4" NPT fixed female
 19 951 0744 19951074424° ext. sealing cone with O-ring + M16 x 1.5 female swivel nut
 19 951 0746 1995107461/4" NPT male stainless steel
 19 951 0749 19951074924° ext. sealing cone with O-ring + M12x1.5 female swivel
 19 951 0751 1995107511/8" NPT fixed male
 19 951 0752 199510752JIC 37° cone + 7/16"-20 UNF swivel nut
 19 951 0754 199510754Sealing head (60°) + G 1/4” female swivel nut, stainless steel


Accessories Part No. Description
  19 951 0008 199510008CIS programable NFC tag
 19 951 1081 199511081Clamb for twin-hose
 19 951 1880 199511880Protection hose PVC
 19 951 1882 199511882Firesleeve Protection hose


Seals Part No. Description
  19 950 0062 199500062Bonded seal 1/4" parallel male thread (tredo/dowty) for 199510730
 19 950 0064 199500064Bonded seal 3/8" parallel male thread (tredo/dowty) for 199510742
 19 950 0084 199500084Bonded seal 1/4" parallel male thread (USIT ring) for 199510731 and 199511831
 09 950 4600 099504600Copper washer


Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.
Technical data
Design: Inner tube of polymide (PA), 2 spiral layers of high tensile steel wire bonded with a special adhesive, outer sheath of thermoplastic polyurethane (PUR).
ID x OD: 6.45 x 11.6 mm
Max. working pressure: 70.0 MPa
Min. burst pressure: 175.0 MPa
Min. bend radius: 70 mm (2.8")
Weight: 170 g/m (6.0 oz)
Temperature range: -10°C — +70°C (14°F — +158°F)

Available files for download

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN.