Pneumatic Products, Air Treatment (FRL)

FRL Systems Model 160

  • Complete, pre-assembled sets
  • Compact design
  • Gauge included


CEJN FRL systems are designed to take the burden off of customers in selecting individual air-treatment products. They combine filter, regulator, and lubricator in a ready-to-use set. The system concept also simplifies ordering procedures, since only one part number is required to order multiple products.


For other combinations and sizes refer to Model 107 and Model 112.

Filter, Regulator & Lubricator Part No. Connection Bowl capacity Max oil capacity Filtration Min flow Max flow
  19 903 2607 199032607G 3/4"50 cl36 cl30 µm20 l/min (0.7 CFM)11000 l/min (388.3 CFM)
 19 903 2609 199032609G 1"50 cl36 cl30 µm90 l/min (3.2 CFM)15700 l/min (554.2 CFM)
 19 903 2627 199032627G 3/4"50 cl36 cl30 µm90 l/min (3.2 CFM)11000 l/min (388.3 CFM)
 19 903 2629 199032629G 1"50 cl36 cl30 µm90 l/min (3.2 CFM)13500 l/min (476.6 CFM)


Filter/Regulator, Porting Block & Lubricator Part No. Connection Bowl capacity Max oil capacity Filtration Min flow Max flow
  19 903 2617 199032617G 3/4"50 cl36 cl30 µm90 l/min (3.2 CFM)11000 l/min (388.3 CFM)
 19 903 2619 199032619G 1"50 cl36 cl30 µm90 l/min (3.2 CFM)13500 l/min (476.6 CFM)


Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards.
Technical data
Media: Compressed air, neutral gas
Max. working pressure @ 23°C: 17.5 bar (253 PSI)
Max. working pressure @ 50°C: 12 bar (174 PSI)
Temperature range: 0°C — +50°C (32°F — +122°F)
Filtering element: Sintered bronze
Material body: Painted aluminium
Material bowl: Metal with level window in polypropylene
Material bowl protector: With safety locking and condensate level view
Condensate drain: Pipeable semi-automatic
Gauge diameter: 50 mm
Controlled pressure: 0.5-12 bar (7-174 PSI)
Hysterisis: 0.5 bar (7 PSI)
Regulating device: Rolling diaphragm (very low hysterisis)
Material seal: Nitrile
Lubrication: Selective oil fog
Lubrication oil: Non-detergent without aggressive additives
Oil refilling: Pressurized
Gauge diameter: 50 mm

Flow capacity is measured at 12 bar (174 PSI) inlet pressure, with a set point at 6.3 bar (91.4 PSI) and pressure drop at 1 bar (14.5 PSI).

Available files for download

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN.