Hydraulic Products, TLX Couplings & Nipples

Series 707 TLX - 1”

TLX is a Flat-Face twist lock coupling for the toughest applications in the construction and demolition segment. This super-duty quick connect coupling is designed to work with the highest surge flows and the toughest pressure impulses. TLX is made from high alloy steels with Zinc-Nickel surface treatment for a long life in the harshest conditions. The Series is available in sizes from ½” to 1 ½” to cover most applications.


The couplings and nipples are also available in 4 other sizes: ½” (Series 507), ¾” (Series 607), 1 ¼” (Series 807) and 1 ½” (Series 907) http://www.cejn.com/upload/download/Brochures/tlx-twist-lock-series/TLX-en.pdf (TLX product folder PDF)

Couplings Part No. Connection
Female thread 10 707 1103 107071103Rc 1"
 10 707 1104 107071104Rc 1 1/4"
 10 707 1203 107071203G 1"
 10 707 1204 107071204G 1 1/4"
 10 707 1233 107071233G 1" JIS ORB
 10 707 1403 1070714031" NPT
 10 707 1603 1070716031 5/16"-12 UN (1" SAE)


Nipples Part No. Connection
Female thread 10 707 6103 107076103Rc 1"
 10 707 6104 107076104Rc 1 1/4"
 10 707 6203 107076203G 1"
 10 707 6204 107076204G 1 1/4"
 10 707 6233 107076233G1” JIS ORB
 10 707 6403 1070764031" NPT
 10 707 6603 1070766031 5/16"-12 UN (1" SAE)


Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.
Technical data
Flow rate: 291 l/min (64.0 GPM) @ 3bar ΔP **
Temperature range: -30°C — +100°C (-22°F — +212°F)
Material coupling: High alloy steels with Zinc-Nickel surface
Material nipple: High alloy steels with Zinc-Nickel surface
Material seal: Nitrile (NBR)
Max. working pressure connected: 420 bar (6091 PSI)
Max. working pressure disconnected: 400 bar (5801 PSI)
Min. burst pressure connected: 1680 bar (24366 PSI)
Min. burst pressure disconnected: 1000 bar (14503 PSI)
Connectability: Connection with residual pressure only limited by operator strength
Disconnection under pressure: Disconnection with residual pressure in the system is allowed

(**) - If the application is constantly above this flow rate on respective coupling size, a larger coupling size should be considered to avoid too high pressure drop. The couplings can handle much higher flow rate during short time periods, but there is a risk of heat build-up in the system. Surge flows far above normal flow rate is in general not a problem.

- TLX is pressure impulse tested at 7614 PSI (525 bar) for 1.000.000 impulses acc. to ISO 7241-2. (Flow Rate) - If the application is constantly above this flow rate on respective coupling size, a larger coupling size should be considered to avoid too high pressure drop. The couplings can handle much higher flow rate during short time periods, but there is a risk of heat build-up in the system. Surge flows far above normal flow rate is in general not a problem.

Pressure drop chart
Series 707 TLX - 1”

Available files for download

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN.