Hydraulic Products, Press-Check / 359 - Screw to Connect Pressure Testing (ISO 15171-2)

Nipples with T-Connection

Test point nipples with T-connections are available in light and heavy designs according to DIN 2353. They come equipped with plastic or metal dust caps.


Press-Check Monitoring System for hydraulics consists of a wide range of test points, minihose and couplings for monitoring and testing of circuits in mobile and hydraulic equipment. It can be installed at any point of the hydraulic system were pressures needs to be monitored. The system is designed and manufactures according to ISO 15171-2 and is fully interchangeable with several other brands.

With Plastic Cap Part No. Connection Length Length 2 Hexagon Hexagon Height Pipe dia. Max working pressure
DIN 2353 Light 10 359 1518 103591518M 12x1.55420191445.5L0631.5 MPa
 10 359 1519 103591519M 14x1.55420241749L0831.5 MPa
 10 359 1520 103591520M 16x1.55922221948L1031.5 MPa
 10 359 1521 103591521M 18x1.55922242249L1231.5 MPa
DIN 2353 Heavy 10 359 1522 103591522M 14x1.55824191746.5S0663.0 MPa
 10 359 1523 103591523M 16x1.55924221948S0863.0 MPa
 10 359 1524 103591524M 18x1.56324222248S1063.0 MPa
 10 359 1525 103591525M 20x1.56324222448S1263.0 MPa


With Metal Cap Part No. Connection Length Length 2 Hexagon Hexagon Height Pipe dia. Max working pressure
DIN 2353 Light 10 359 1568 103591568M 12x1.55420191445.5L0631.5 MPa
 10 359 1569 103591569M 14x1.55420241749L0831.5 MPa
 10 359 1570 103591570M 16x1.55922221948L1031.5 MPa
 10 359 1571 103591571M 18x1.55922242249L1231.5 MPa
DIN 2353 Heavy 10 359 1572 103591572M 14x1.55824191746.5S0663.0 MPa
 10 359 1573 103591573M 16x1.55924221948S0863.0 MPa
 10 359 1574 103591574M 18x1.56324222248S1063.0 MPa
 10 359 1575 103591575M 20x1.56324222448S1263.0 MPa


Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.
Technical data
Material nipple: Zinc-plated steel
Material seal: Nitrile (NBR)
Temperature range: -20°C — +100°C (-4°F — +212°F)

Available files for download

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN.