Ultra High-Pressure Hydraulic Products, Couplings & Nipples

Series 117 - 14,500 PSI (1000 bar)

  • Compact design
  • Unique sealing design
  • Non-drip on connection and disconnection
  • Dust caps included as standard
  • Coupling with extra safety ring available


Series 117 is a sister coupling to Series 115 and is used alongside the series 115 in applications where the systems must not, under any circumstances, be interconnected. 115 and 117 offer the same performance and qualities, but cannot be connected with one another, which makes them an unbeatable combination for rescue tools, etc. All exposed components are made of zinc plated steel. Plastic dust caps are standard on both coupling and nipple.


Couplings Part No. Remark Connection Length Diameter Hexagon Rec. torque (Nm) Rec. seal. method
Female thread 10 117 1202 101171202-G 1/4"61.3282440-50CMS*
 10 117 1404 101171404-3/8" NPT60.4282470-80-
Male thread 10 117 1254 101171254-G 3/8"60.8282470-80T3*
 10 117 1454 101171454-3/8" NPT62.3282470-80-


Couplings with safety lock Part No. Remark Connection Length Diameter Hexagon Rec. torque (Nm) Rec. seal. method
Female thread 10 117 1232 101171232Safety lockG 1/4"61.3282440-50CMS*
 10 117 1434 101171434Safety lock3/8" NPT---70-80-


Nipples Part No. Remark Connection Length Diameter Hexagon Rec. torque (Nm) Rec. seal. method
Female thread 10 117 6202 101176202-G 1/4"3825.42240-50CMS*
 10 117 6404 101176404-3/8" NPT3727.72440-50-


Adapters Part No. Remark Connection Length Diameter Hexagon Rec. torque (Nm) Rec. seal. method
Swivel connection 19 950 1650 199501650Adapter with integrated swivelG 1/4"-50.5See drawing40-50CMS*


*CMS= Cejn metal seal (120° cone), T1= rubber metal seal (19 950 0061), T2= rubber metal seal (19 950 0062), T3= rubber metal seal (19 950 0063), T4= high strength rubber metal seal (19 950 0083), W= cupper washer (09 950 4600).
Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.
Technical data
Nominal flow diameter: 2.5 mm (3/32")
Flow capacity: 6.0 l/min (1.3 GPM UK)
Max. working pressure: 100.0 MPa
Min. burst pressure: 260.0 MPa
Temperature range: -30°C — +100°C (-22°F — +212°F)
Material coupling: Hardened, zinc chromate plated steel
Material nipple: Hardened, zinc chromate plated steel
Material seal: Nitrile (NBR) other sealing material on request

Flow capacity is measured at 50 PSI (1.47 GPM) pressure drop.

Oil Flow
Pressure drop, PSI Series 117 - 14,500 PSI (1000 bar) Flow, GPM

Available files for download

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN.