Thermal Control Products, Auto-Couplings Fluids

DLC, DN3 Stainless steel

  • Spill-free connection and disconnection
  • Self-aligning feature
  • Connection under full working pressure
  • Stainless steel version

CEJN DLC (Direct Liquid Cooling) is a blind mate product designed for demanding liquid-cooled electronic applications. Applications where minimal air intrusion and spill-free connections and disconnections are required. The DLC series has a unique design that guarantees a tight joint, protecting the seal from damage during connection and disconnection under pressure. A self-aligning feature enable blind connections, and to ensure maximum durability and corrosion-resistant performance both couplings and nipples are made of Stainless Steel. Standard sealing is a specially developed Nitrile Rubber (NBR) that withstand working temperatures from -40°C (-40°F) to +80°C (+176°F). Other sealing materials such as EPDM are also available.

Applications: Thermal control of data centers, power electronics, broadcasting transmitters, medical imaging, hybrid/electric industrial vehicles, renewable energy solutions and all other electronic equipment using DLC technology. (Water Flow DLC, DN3 PDF)

Couplings Part No. Connection A B D E   G
  10 150 1540 101501540M11 x 129.314.51319.2 NBR
 10 150 1544 101501544M11 x 129.314.51319.2 EPDM

Couplings (Sockets) - version ±1,0 misalignment Part No. Connection A B D E   G
  10 150 1550 101501550M11x1 male29.614.51319.5 EPDM
 10 150 1545 101501545M11x1 male29.614.51319.5 NBR

Nipples Part No. Connection A B D E   G
  10 150 6540 101506540M11 x 128.514.51318.4 NBR
 10 150 6544 101506544M11 x 128.514.51318.4 EPDM

Nipples (Plugs) - version ±1,0 misalignment Part No. Connection A B D E   G
  10 150 6545 101506545M11x1 male33.620.51923.3 NBR
 10 150 6550 101506550M11x1 male33.620.51923.3 EPDM

Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.
Technical data
Nominal flow diameter: 3 mm (0.1")
Max. working pressure: 16 bar (232 PSI)
Min. burst pressure: 64 bar 928 PSI
Connection under pressure: 16 bar (232 PSI)
Temperature range: -40°C — +100°C (-40°F — +212°F)
Material coupling: AISI 316L Stainless steel
Material nipple: AISI 316L Stainless steel
Material seal: NBR Low temp -40°F - +176°F (-40°C - +80°C), EPDM -22°F - +212°F (-30°C - +100°C)

Important: ±1,0 mm radial misaligment versions shall not be combined with standard version.

Pressure drop, bar (PSI) DLC, DN3 Stainless steel Flow, l/min. (GPM)

Available files for download

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN.