Hydraulic Products, TLX Couplings & Nipples

Series 807 TLX - 1 ¼”

TLX is a flat-face twist lock coupling for the toughest applications in the construction and demolition segment. This super-duty quick connect coupling is designed to work with the highest surge flows and the toughest pressure impulses. TLX is made from high alloy steels with Zinc-Nickel surface treatment for a long life in the harshest conditions. The Series is available in sizes from ½” to 1½” to cover most applications.


The couplings and nipples are also available in 4 other sizes: ½” (Series 507), ¾” (Series 607), 1” (Series 707) and 1 ½” (Series 907) https://www.cejn.com/globalassets/documents/brochures/tlx-twist-lock-series/tlx-en.pdf (TLX product folder PDF)

Series 807 TLX - 1 ¼”
Couplings Part No. Connection
Female thread 10 807 1104 108071104Rc 1 1/4"
 10 807 1204 108071204G 1 1/4"
 10 807 1205 108071205G 1 1/2"
 10 807 1234 108071234G 1 1/4" JIS ORB
 10 807 1404 1080714041 1/4" NPT
 10 807 1604 1080716041 5/8"-12 UN - (1 1/4" SAE)


Nipples Part No. Connection
Female thread 10 807 6104 108076104Rc 1 1/4"
 10 807 6204 108076204G 1 1/4"
 10 807 6205 108076205G 1 1/2"
 10 807 6234 108076234G 3/4" JIS ORB
 10 807 6404 1080764041 1/4" NPT
 10 807 6604 1080766041 5/8"-12 UN - (1 1/4" SAE)


Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.
Technical data
Flow rate: 400 l/min (88.0 GPM) @ 3bar ΔP **
Temperature range: -30°C — +100°C (-22°F — +212°F)
Material coupling: High alloy steels with Zinc-Nickel surface
Material nipple: High alloy steels with Zinc-Nickel surface
Material seal: Nitrile (NBR)
Max. working pressure connected: 420 bar (6091 PSI)
Max. working pressure disconnected: 400 bar (5801 PSI)
Min. burst pressure connected: 1680 bar (24366 PSI)
Min. burst pressure disconnected: 1000 bar (14503 PSI)
Connectability: Connection with residual pressure only limited by operator strength
Disconnection under pressure: Disconnection with residual pressure in the system is allowed

(**) - If the application is constantly above this flow rate on respective coupling size, a larger coupling size should be considered to avoid too high pressure drop. The couplings can handle much higher flow rate during short time periods, but there is a risk of heat build-up in the system. Surge flows far above normal flow rate is in general not a problem.

- TLX is pressure impulse tested at 7614 PSI (525 bar) for 1.000.000 impulses acc. to ISO 7241-2. (Flow Rate) - If the application is constantly above this flow rate on respective coupling size, a larger coupling size should be considered to avoid too high pressure drop. The couplings can handle much higher flow rate during short time periods, but there is a risk of heat build-up in the system. Surge flows far above normal flow rate is in general not a problem.

Pressure drop chart
Series 807 TLX - 1 ¼”

Available files for download

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN.