Ultra High-Pressure Hydraulic Products, Stainless Steel Range LP (up to 15k PSI)

LP Adapters, JIC to HP, Stainless Steel

Industry standard tube adapters from JIC to HP. Connect from HP 60° tube to the JIC 37° flared tube fittings (SAE J514 and ISO 8434-2). The small seal area results in a compact, robust design flared tube end to seal and hold fluid under high pressure. The JIC design has low assembly torque relative to the pressure rating.


Applications: Diagnostic pressure readings and system testing in fluid power applications. Power hydraulics for construction.

Part No. Connection 1 Connection 2 Max working pressure Rec. torque (Nm)
19 950 2090199502090 JIC 4 1/4" HP 103.0 MPa conn.1: 18 conn.2: 34
19 950 2091199502091 JIC 4 3/8" HP 69.0 MPa conn.1: 18 conn.2: 68
19 950 2092199502092 JIC 4 9/16" HP 103.0 MPa conn.1: 18 conn.2: 150
19 950 2093199502093 JIC 6 1/4" HP 103.0 MPa conn.1: 30 conn.2: 34
19 950 2094199502094 JIC 6 3/8" HP 103.0 MPa conn.1: 30 conn.2: 68
19 950 2095199502095 JIC 6 9/16" HP 103.0 MPa conn.1: 30 conn.2: 150
19 950 2096199502096 JIC 8 1/4" HP 69.0 MPa conn.1: 64 conn.2: 34
19 950 2097199502097 JIC 8 3/8" HP 103.0 MPa conn.1: 64 conn.2: 68
19 950 2098199502098 JIC 8 9/16" HP 103.0 MPa conn.1: 64 conn.2: 150
Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.
Technical data
Material: Acid resistant, NACE certified, stainless steel 316L /EN1.4404 cold drawn.

Available files for download

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN.