Pneumatic Products, Air Treatment (FRL)

Lubricators Model 653

  • Refillable under pressure
  • Constant oil flow for reliable lubrication
  • High flow capacity

Lubricators are necessary if you want to extend service life, maintain peak performance and reduce wear and tear on tools and machines powered by compressed air. CEJN’s Model 653 for working pressures of up to 10 bar (145 PSI) is one of our most popular lubricators. Model 653 allows for proportional oil delivery, adjusted using a lockable oil-setting knob. 360-degree visibility of oil flow is possible thanks to the transparent glass. To achieve optimum efficacy with oil lubricators, CEJN recommends that you always install them close to the application. No tools are needed for adjustment. CEJN lubricators start to lubricate at a very low flow. The recommended lubrication oil is 199031580 (1 L) and 199031581 (5 L). Application: Virtually every industry, e.g. manufacturing, food, processing, carpentry, paper mills, etc., relies on compressed air as an energy source. In a shared compressed air network, with numerous outlets and an extensive pipework system, air preparation units are especially important.

For smaller sizes we recommend Model 651 and Model 652. Additional air preparation products, including preassembled units, are available in our air treatment range.

Part No. A B C D E F
19 503 2307195032307 90 266 216 93 46.5 G 3/4"
19 503 2309195032309 90 266 216 93 46.5 G 1"
LUBRICATOR Part No. Connection Bowl capacity Max oil capacity Min flow Max flow
  19 503 2307 195032307G 3/4"20 cl20 cl13000 l/min (458.9 CFM)13000 l/min (458.9 CFM)
 19 503 2309 195032309G 1"20 cl20 cl13000 l/min (458.9 CFM)13000 l/min (458.9 CFM)

Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards.
Technical data
Media: Air & Neutral Gas
Max. working pressure @ 23°C: 10 bar (145 PSI)
Max. working pressure @ 50°C: 10 bar (145 PSI)
Temperature range: 5°C — +50°C (41°F — +122°F)
Material body: Aluminium
Material bowl: Polycarbonate
Material bowl protector: Polyamide
Lubrication: 100 l/ Min
Lubrication oil: VG32 - ISO3448
Oil refilling: Under Pressure

Flow capacity is measured at 6.3 bar (91.4 PSI) inlet pressure, and pressure drop at 1 bar (14.5 PSI).

Air Flow
Outlet pressure, bar (PSI) Lubricators Model 653 Flow, l/min. (CFM)

Available files for download

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN.