Ultra High-Pressure Hydraulic Products, Screw-to-Connect Couplings & Nipples

Series 232, DN6.3

Series 232 is a screw-to-connect Series and a good complement to CEJN’s large range of quick connect couplings. It is also characterised by CEJN’s quality approach and has a high flow rate capacity. The Series can be connected under pressure and is interchangeable with most screw-to-connect couplings. Hand pumps, cylinders and jacks are just a few examples of application areas.

Couplings Part No. Connection Length Diameter Hexagon Rec. torque (Nm)
Female thread 10 232 1402 1023214021/4" NPT60292150-60
Male thread 10 232 1451 1023214511/8" NPT56.4292140-50
 10 232 1452 1023214521/4" NPT60.4292150-60


Nipples Part No. Connection Length Diameter Hexagon Rec. torque (Nm)
Female thread 10 232 6402 1023264021/4" NPT33.826.72150-60
Male thread 10 232 6451 1023264511/8" NPT50.326.72140-50
 10 232 6452 1023264521/4" NPT54.326.72150-60


Couplings with teeth lock Part No. Connection Length Diameter Hexagon Rec. torque (Nm)
Female thread 10 232 1442 1023214421/4" NPT60292150-60
Male thread 10 232 1492 1023214921/4" NPT60292150-60


Nipples with teeth lock Part No. Connection Length Diameter Hexagon Rec. torque (Nm)
Female thread 10 232 6442 1023264421/4" NPT54.2291850-60
Male thread 10 232 6492 1023264921/4" NPT54.2291850-60


Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.
Technical data
Nominal flow diameter: 6.3mm (1/4")
Flow capacity: 16.1 l/min (3.5 GPM UK)
Max. working pressure: 72.0 MPa
Min. burst pressure connected: 216.0 MPa
Min burst pressure coupling disconnected: 180.0 MPa
Min burst pressure nipple disconnected: 149.0 MPa
Temperature range: -30°C — +100°C (-22°F — +212°F)
Material coupling: Zinc plated steel
Material nipple: Zinc plated steel
Material seal: Nitrile NBR

Flow capacity is measured at 0.4 MPa pressure drop.

Oil Flow
Pressure drop, MPa Series 232, DN6.3 Flow, l/min. (GPM UK)

Available files for download

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN.