Ultra High-Pressure Hydraulic Products, Couplings & Nipples

Series 115, 100 MPa

  • Quick-action safety lock eliminates any risk of accidental disconnection
  • Non-drip on connection and disconnection
  • Dust caps included as standard
  • Unique sealing design
  • Nipple with hose rupture valve available


The 115 series of hydraulic quick connect couplings for ultra high pressure are easy to handle, safe and reliable. The quick couplers are available in both standard and flat-face designs. Series 115 are non-drip couplings with clean connection and disconnection protecting both the environment and circuit integrity. The safety lock comes as standard and it adds an extra layer of safety by eliminating any risks of accidental disconnections. The high performance and robust design with small outer dimensions, makes it a suitable option in many different applications. The nipples are also available with a hose rupture valve. In the event of a ruptured hose, the nipple closes and prevents oil spills that could disrupt production and harm the environment. Plastic dust caps come as standard for both the couplings and nipples. These extend the lifetime of couplings, nipples and the entire hydraulic system. Aluminium dust caps are also available upon request.


Applications: Hydraulic bolt tensioning, Test benches, Cylinders, Bearing pullers, Torque tools, Rescue tools

Series 115, 100 MPa
Couplings with safety lock Part No. Remark Connection Length Diameter Hexagon Rec. torque (Nm) Rec. seal. method
Female thread 10 115 1102 101151102-Rc 1/4”60.4282450-60-
 10 115 1201 101151201-G 1/8”60.4282440-50T1*
 10 115 1202 101151202-G 1/4”61.3282440-50CMS*
 10 115 1204 101151204-G 3/8”63.3282470-80T3*
 10 115 1401 101151401-1/8” NPT60.4282440-50-
 10 115 1402 101151402-1/4” NPT60.4282450-60-
 10 115 1404 101151404-3/8” NPT60.4282470-80-
 10 115 1104 101151104-Rc 3/8”60.8282470-80-
Male thread 10 115 1452 101151452-1/4” NPT72.3282450-60-
 10 115 1454 101151454-3/8” NPT72.8282470-80-
 10 115 1252 101151252-G 1/4”71.8282440-50T2*
 10 115 1254 101151254-G 3/8”71.8282470-80T3*


Nipples Part No. Remark Connection Length Diameter Hexagon Rec. torque (Nm) Rec. seal. method
Female thread 10 115 6102 101156102-Rc 1/4”36.724.72230-40-
 10 115 6104 101156104-Rc 3/8”3827.72440-50-
 10 115 6201 101156201-G 1/8”33.319.61740-50T1*
 10 115 6202 101156202-G 1/4”3824.72240-50CMS*
 10 115 6204 101156204-G 3/8”39.526.72470-80T3*
 10 115 6401 101156401-1/8” NPT33.319.61720-25-
 10 115 6402 101156402-1/4” NPT35.725.42230-40-
 10 115 6404 101156404-3/8” NPT3727.72440-50-
Male thread 10 115 6152 101156152-R 1/4”6325.42250-60-
 10 115 6154 101156154-R 3/8”6325.42270-80-
 10 115 6212 101156212-G 1/4”50.324.72240-50T2*
 10 115 6254 101156254-G 3/8”6225.42270-80T3*
 10 115 6451 101156451-1/8” NPT50.819.61740-50-
 10 115 6452 101156452-1/4” NPT61.525.42250-60-
 10 115 6454 101156454-3/8” NPT6225.42270-80-
 10 115 6272 101156272Hose rupture valve that closes above 13 l/min (2.9 GPM uk)G 1/4”5224.72240-50T2*


Adapters Part No. Remark Connection Length Diameter Hexagon Rec. torque (Nm) Rec. seal. method
Swivel connection 19 950 1650 199501650Adaptor with integrated swivelG 1/4”-50.5See drawing40-50CMS*
 19 950 1651 199501651  -52.53440-50 
 19 950 1652 199501652  ---40-50 
 19 950 1655 199501655  4460.419 + 3240-50 


*CMS= Cejn metal seal (120° cone), T1= rubber metal seal (19 950 0061), T2= rubber metal seal (19 950 0062), T3= rubber metal seal (19 950 0064), T4= high strength rubber metal seal (19 950 0083), W= copper washer (09 950 4600).
Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.
Technical data
Nominal flow diameter: 2.5 mm (3/32")
Flow capacity: 6.0 l/min (1.3 GPM UK)
Max. working pressure: 100.0 MPa
Min. burst pressure: 260.0 MPa
Temperature range: -30°C — +100°C (-22°F — +212°F)
Material coupling: Hardened, zinc chromate plated steel
Material nipple: Hardened, zinc chromate plated steel
Material seal: Nitrile (NBR) other sealing materials on request

Flow capacity is measured at 0.4 MPa pressure drop.

Oil Flow
Pressure drop, MPa Series 115, 100 MPa Flow, l/min (GPM UK)

Available files for download

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN.