Ultra High-Pressure Hydraulic Products, Hose Assemblies
Hose 150 MPa, DN 4
The CEJN High-Pressure hose has two layers of close spiralized ultra-high tensile steel wire, bonded with a special adhesive. This reinforced polymer hose picks up applications where its small diameter and lightweight construction are required. It gives ultra-high working pressure with maintained flexibility through entire life. Its low volumetric expansion gives fast response time in hydraulic systems while the smooth inner bores provide a minimized pressure drop. A long-lasting service time and extended hose life in even the toughest applications is a result of the kink-resistant steel-reinforced construction, abrasion-resistant covers and a superior chemical resistance.
Hose | Part No. | Description |
19 951 1501 199511501 | Blue | |
End connections | Part No. | Description |
19 951 1531 199511531 | G 1/8" male + seal Tredo metal seal (19 950 0061) | |
19 951 1532 199511532 | G 1/4" male + 100° ext. sealing cone (for CMS* 120°). | |
19 951 1533 199511533 | 1/8" NPT male | |
Accessories | Part No. | Description |
19 951 1580 199511580 | Protection hose PVC | |
19 951 1882 199511882 | Firesleeve Protection hose | |
19 951 0008 199510008 | CIS programable NFC tag | |
Seals | Part No. | Description |
19 950 0061 199500061 | Bonded seal 1/8” parallel male thread (tredo/dowty) suitable for 199511531 and other connections | |
Technical data | |
Inner tube of Polyoxymethylene (POM), 2 spiral layers of ultra-high tensile steel wire, outer sheath of polyamide. | |
4,0 x 7,9 mm | |
150.0 MPa | |
375.0 MPa | |
75 mm (3.0") | |
110 g/m (3.9 oz) | |
-10°C — +70°C (14°F — +158°F) |