Thermal Control Products, Auto-Couplings Fluids

DLC, DN5 Aluminum

  • Optimized for extreme spill-free connection/disconnection
  • Excellent flow capacity
  • Self-aligning
  • Panel and thread versions available
  • Connection under full working pressure

DLC is a blind-mate coupling designed for thermal management applications requiring an auto-coupling with spill-free connection and disconnection. The series has a self-aligning feature to enable blind connection, where a combination of thread and panel versions is possible. The unique design of the series protects the seal from damage during connection/disconnection under pressure, to guarantee a tight joint. The specially developed Nitrile (NBR) sealing withstands working temperatures from -40°C (-40°F) to +80°C (+176°F). DLC in DN5 is made of hard-anodized aluminium alloy for maximum durability and corrosion resistance.

If you can’t find a product that meets your requirements, don’t hesitate to contact us, and we’ll put our R&D department at your disposal. (Water Flow Series 150 PDF)

Applications:Thermal control of data centres, power electronics, broadcasting transmitters, medical imaging, hybrid/electric industrial vehicles, renewable energy solutions and all other electronic equipment using DLC technology.

DLC, DN5 Aluminum
Technical data
Nominal flow diameter: 5 mm (3/16")
Max. working pressure: 10 bar (145 PSI)
Min. burst pressure: 40 bar 580 PSI
Connection under pressure: 10 bar (145 PSI)
Temperature range: -40°C — +80°C (-40°F — +176°F)
Material coupling: Surface treated aluminum alloy
Material nipple: Surface treated aluminum alloy
Material seal: NBR -40°C - +80°C (-40°F - +176°F) or EPDM -30°C - +100°C (-22°F - +212°F)
Pressure drop, bar (PSI)
DLC, DN5 Aluminum
Flow, l/min. (GPM UK)
Coupling Part No. Connection A B D E F G
  10 150 1900101501900M19x136.820.518.017.0-NBR
 10 150 1921101501921M19x136.820.518.017.0-EPDM
 10 150 1901101501901For 4x screws (M3)36.837.028.017.0-NBR
 10 150 1922101501922For 4x screws (M3)36.837.028.017.0-EPDM

Nipple Part No. Connection A B D E F G
  10 150 6900101506900M16x0,7537.517.516.020.5-NBR
 10 150 6921101506921M16x0,7537.517.516.020.5-EPDM
 10 150 6901101506901For 4x screws (M3)37.529.022.320.5-NBR
 10 150 6922101506922For 4x screws (M3)37.529.022.320.5-EPDM

Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN.

Available files for download