Hydraulic Products, Press-Check / 359 - Screw to Connect Pressure Testing (ISO 15171-2)

Stand Pipe Nipples

Stand pipe test point nipples come equipped with plastic or metal dust caps.


Press-Check Monitoring System for hydraulics consists of a wide range of test points, minihose and couplings for monitoring and testing of circuits in mobile and hydraulic equipment. It can be installed at any point of the hydraulic system were pressures needs to be monitored. The system is designed and manufactures according to ISO 15171-2 and is fully interchangeable with several other brands.

Stand Pipe Nipples
Technical data
Material nipple: Zinc-plated steel
Material seal: Nitrile (NBR)
Temperature range: -20°C — +100°C (-4°F — +212°F)
With Plastic Cap Part No. Connection Length Length 2 Pipe dia. Max working pressure
Stand Pipe Ø6 mm 10 359 1800103591800Ø65720663.0 MPa
Stand Pipe Ø8 mm 10 359 1801103591801Ø85720863.0 MPa


with Metal Cap Part No. Connection Length Length 2 Pipe dia. Max working pressure
Stand Pipe Ø6 mm 10 359 1850103591850Ø65720663.0 MPa
Stand Pipe Ø8 mm 10 359 1851103591851Ø85720863.0 MPa


Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN.

Available files for download