Hydraulic Products, Press-Check / 359 - Screw to Connect Pressure Testing (ISO 15171-2)

Nipples with Female Swivel

Test point nipples with female swivel JIC 37° - SAE J514 design come equipped with plastic or metal dust caps.


Press-Check Monitoring System for hydraulics consists of a wide range of test points, minihose and couplings for monitoring and testing of circuits in mobile and hydraulic equipment. It can be installed at any point of the hydraulic system were pressures needs to be monitored. The system is designed and manufactures according to ISO 15171-2 and is fully interchangeable with several other brands. Depending on thread and type of sealing the components can be used for working pressures up to 630 bar (9 135 PSI).

Nipples with Female Swivel
Technical data
Material nipple: Zinc-plated steel
Material seal: Nitrile (NBR)
Temperature range: -20°C — +100°C (-4°F — +212°F)
With Plastic Cap Part No. Connection Length Hexagon Max working pressure
JIC 37° - SAE J514 10 359 17041035917047/16"-20 UNF641445.0 MPa
 10 359 17051035917051/2"-20 UNF671742.0 MPa
 10 359 17061035917069/16"-18 UNF691935.0 MPa
 10 359 17071035917073/4"-16 UNF712235.0 MPa


with Metal Cap Part No. Connection Length Hexagon Max working pressure
JIC 37° - SAE J514 10 359 17541035917547/16"-20 UNF641445.0 MPa
 10 359 17551035917551/2"-20 UNF671742.0 MPa
 10 359 17561035917569/16"-18 UNF691935.0 MPa
 10 359 17571035917573/4"-16 UNF712235.0 MPa


Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN.

Available files for download