Hydraulic Products, Press-Check / 359 - Screw to Connect Pressure Testing (ISO 15171-2)

Hose DN2

Extremely flexible, polyamide, high-pressure hose assemblies enable users to monitor pressures from remote locations and easily connect gauges in confined areas. Included in the hose range is also a wide range of fittings.


Press-Check Monitoring System for hydraulics consists of a wide range of test points, minihose and couplings for monitoring and testing of circuits in mobile and hydraulic equipment. It can be installed at any point of the hydraulic system were pressures needs to be monitored. The system is designed and manufactures according to ISO 15171-2 and is fully interchangeable with several other brands.

Hose DN2
Technical data
ID x OD: 2x5 mm
Min. bend radius: 20 mm
Max. working pressure: 63.0 MPa
Test Pressure: 95.0 MPa
Min. burst pressure: 190.0 MPa
Design: Tube and cover in polyamide with a kevlar braid
Weight: 18 g/m
Temperature range: -40°C — +100°C (-40°F — +212°F)
Comment: 100% Working pressure between -20° to +50°C
Hose Part No. Connection Length Hexagon Pipe dia. Max working pressure
DN2 19 359 6400193596400----63.0 MPa


Sleeve Part No. Connection Length Hexagon Pipe dia. Max working pressure
Ø8 mm 19 359 6420193596420Ø814--- MPa


Couplings for test nipple Part No. Connection Length Hexagon Pipe dia. Max working pressure
Nut connection 19 359 6458193596458M 16x1.52219-63.0 MPa
 19 359 6430193596430M 16x22219-63.0 MPa


Female swivels Part No. Connection Length Hexagon Pipe dia. Max working pressure
DIN 3865 19 359 6432193596432M 14x1.52117663.0 MPa
 19 359 6433193596433M 14x1.52117831.5 MPa
 19 359 6434193596434M 16x1.52119863.0 MPa
 19 359 6435193596435M 16x1.521191031.5 MPa
 19 359 6436193596436M 18x1.521221063.0 MPa
DIN 3865 90° Elbow 19 359 6437193596437M 12x1.52714631.5 MPa
 19 359 6438193596438M 14x1.52717663.0 MPa
 19 359 6439193596439M 14x1.52717831.5 MPa
 19 359 6440193596440M 16x1.52719863.0 MPa
 19 359 6441193596441M 16x1.527191031.5 MPa
 19 359 6442193596442M 18x1.527221063.0 MPa
Female Swivel ISO 8434-3 19 359 644719359644711/16" -16UNF2319-63.0 MPa
60° Female Swivel DIN 3863 19 359 6448193596448G 1/8"1414-63.0 MPa
 19 359 6449193596449G 1/4"1817-63.0 MPa
JIC 37° Female Swivel 19 359 64501935964507/16" -20 UNF1514-45.0 MPa
 19 359 64511935964511/2" -20 UNF1716-42.0 MPa


Gauge adapters Part No. Connection Length Hexagon Pipe dia. Max working pressure
Female Pressure Gauge Adapter EN 837-1 19 359 6443193596443G 1/4"1517-63.0 MPa
 19 359 6444193596444G 1/2"1727-63.0 MPa
Female Pressure Gauge Adapter 19 359 6445193596445M 20x1.51724-63.0 MPa
Female Direct Gauge Connection 19 359 64461935964461/4" -18 NPTF2319-63.0 MPa


Male fittings Part No. Connection Length Hexagon Pipe dia. Max working pressure
Male Metal Seal Fitting 19 359 6452193596452G 1/8"1913-40.0 MPa
 19 359 6453193596453G 1/4"24.519-63.0 MPa
Male Fitting 19 359 64541935964541/8" -27 NPTF2113-40.0 MPa


Stand pipe Part No. Connection Length Hexagon Pipe dia. Max working pressure
Stand Pipe 19 359 6455193596455Ø426--- MPa
 19 359 6456193596456Ø625--- MPa
 19 359 6457193596457Ø825--- MPa


Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN.

Available files for download