Hydraulic Products, X64 Range - ISO 16028 Flat-Face Pressure Eliminator Nipples

Series 364, DN10 Pressure Eliminator

  • Flat-Face design
  • Connection under pressure
  • One-hand operated

CEJN Series 364 is a Flat-Face quick-connect nipple with a built-in pressure eliminator. The nipple is according to and exceeds the demands in the ISO 16028 Standard for low- and medium-pressure hydraulic applications. The Flat-Face design minimizes spillage during connection and disconnection. The pressure eliminator allows for connection with residual/trapped pressure on the nipple side. The nipple Series 364 connects with couplings in Series 365, Series 366 and Series 362.

The pressure eliminator nipples are also available in four other sizes; DN 6.3 (Series 264), DN 12.5 (Series 564), DN 16 (Series 664), DN 19 (Series 764). For steel couplings in accordance with ISO 16028 see Series 365. Stainless steel versions of the standard are available in Series 366. Series 362 feature an interchangeable steel coupling designed for lower pressures.

Series 364, DN10 Pressure Eliminator
Technical data
Temperature range: -30°C — +100°C (-22°F — +212°F)
Material nipple: Hardened steel (zinc passivation)
Material seal: Nitrile (NBR/PUR)
Connectability: With static pressure up to 400 bar on the nipple side
Max. working pressure connected: 400 bar (5801 PSI)
Max. working pressure disconnected: 400 bar (5801 PSI)
Min. burst pressure connected: 1200 bar (17404 PSI)
Min. burst pressure disconnected: 1200 bar (17404 PSI)
Disconnection under pressure: Not allowed
Comment: Connects with couplings from Series 365, Series 366 and Series 362
Interchangeable with: All brands dimensionally interchanging with ISO16028

Rated flow is measured at 0.1 MPa pressure drop.
Approved to max working pressure
Max working pressure 25 MPa according to ISO 16028

Pressure drop chart
Series 364, DN10 Pressure Eliminator
Flow measured with coupling Series 365
Nipples with pressure eliminator Part No. Connection Length Diameter Hexagon Seal
Female thread 10 364 6204103646204G 3/8" (BSP)75.92825NBR/PUR
 10 364 6205103646205G 1/2" (BSP)79.330.227NBR/PUR
 10 364 64041036464043/8" NPT75.92825NBR
 10 364 6104103646104Rc 3/8" (BSPT)75.930.225NBR/PUR
 10 364 6105103646105Rc 1/2" (BSPT)79.330.227NBR/PUR
 10 364 6295103646295G 1/2" JIS ORB79.330.227NBR/PUR
 10 364 64051036464051/2" NPT79.330.227NBR/PUR
 10 364 66041036466049/16"-18 UNF (3/8" SAE)75.92825NBR/PUR
 10 364 6294103646294G 3/8" JIS ORB75.92825NBR/PUR
 10 364 66051036466053/4"-16 UNF (1/2" SAE)79.33027NBR/PUR
Male thread 10 364 6552103646552M16x1.5 10L78.32825NBR/PUR
 10 364 6554103646554M18x1.5 12L78.32825NBR/PUR
 10 364 6555103646555M22x1.5 15L79.32825NBR/PUR
 10 364 6557103646557M18x1.5 12LS bulkhead103.32825.24NBR/PUR
 10 364 6558103646558M22x1.5 15LS bulkhead105.33427.30NBR/PUR
 10 364 675710364675711/16"-16 ORFS bulkhead101.330.527NBR/PUR

Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN.

Available files for download