Ultra High-Pressure Hydraulic Products, Hose Assemblies

Hose 180 MPa, DN 5

The CEJN High-Pressure hose is a spiralized steel reinforced polymer hose that picks up where conventional product capabilities stop. It gives you ultra-high working pressure with maintained flexibility through entire life. Its low volumetric expansion gives fast response time in hydraulic systems while the smooth inner bores provide a minimized pressure drop. A long-lasting service time and extended hose life in even the toughest applications is a result of the kink-resistant steel-reinforced construction, abrasion-resistant covers and a superior chemical resistance. The small outside diameter makes the hose ideal for tight routing.

Hose 180 MPa, DN 5
Technical data
Design: Inner tube of polyoxymethylene (POM), 4 spiral layers of high tensile steel wire, outer sheath of polymide (PA)
ID x OD: 4.7 x 11.5 mm
Max. working pressure: 180.0 MPa
Min. burst pressure: 450.0 MPa
Min. bend radius: 130 mm (5.1")
Weight: 280 g/m (9.9 oz)
Temperature range: -40°C — +100°C (-40°F — +212°F)
Hose Part No. Description
  19 951 1801199511801Blue


End Connections Part No. Description
  19 951 1830199511830G 1/4" male with 60° int. sealing cone + recess for Tredo ring
 19 951 1831199511831G 1/4" male flat end for copper washer, with recess for USIT ring
 19 951 1832199511832G 1/4" male with 120° ext. sealing cone (CMS)
 19 951 1833199511833Sealing head (60°) + G 1/4" female swivel nut
 19 951 183519951183559° ext. sealing cone + 9/16"-18 UNF female swivel nut
 19 951 1836199511836Sealing head (60°) + M14 x 1.5 female swivel nut


Accessories Part No. Description
  19 951 1880199511880Protection hose PVC


Rubber metal seal Part No. Description
  19 950 0062199500062For 1/4” parallel male thread (tredo/dowty)
 19 950 0084199500084For 1/4" parallel male thread (USIT ring)


Rubber metal seal. High strength version Part No. Description
  19 950 0083199500083For 1/4" parallel male thread (tredo/dowty)


Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.

Please complete the form below in order to gain access to downloadable product files. The data you provide is for internal information purposes only and will not be published or made available outside of CEJN.

Available files for download